Sony DCR-HC1000 - Manual (Page 44)

Playback 44
Playback
Viewing movies
recorded on a tape
Make sure you have a recorded cassette
inserted into your camcorder.
Some of the operations are possible using the
Remote Commander or using the touch
panel.
When you want to play back recordings on
your TV, see page 51.
1
Press OPEN and open the LCD panel.
2
Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
3
Touch (rewind) to go to the point
you want to view.
4
Touch (play) to start playback.
To adjust the volume
1 Touch .
2 Touch [VOLUME].
If the item is not displayed on the screen,
touch
/ . If you cannot find it, touch
[MENU], and select it from the
(STANDARD SET) menu.
3 Adjust the volume by touching
(decrease) / (increase), then touch
.
To stop playback
Touch (stop).
To pause
Touch (pause) during playback. Touch it
again to restart the playback.
Playback stops automatically when the pause
mode continues for more than 5 minutes.
To fast forward or rewind
Touch (fast forward) or (rewind) in
stop mode.
To review movies on the viewfinder
Close the LCD panel.
Indicators displayed during tape
playback
A Remaining battery
B Recording mode (SP or LP)
C Tape transport indicator
POWER switch OPEN
Slide the POWER
switch while
pressing the green
button.
0:00:00:00 60min
60min
P-MENU
0:00:00:15 60min
60min
P-MENU