Sony DCR-HC1000 - Manual (Page 50)

Playback 50
Displaying the screen indicators
You can choose to display the time code, tape
counter, and other information on the screen.
Press DISPLAY/BATT INFO.
The indicator switches on or off as you press the
button.
z Tip
• You can display the screen indicators during
playback on a TV. Select the (STANDARD
SET) menu, [DISPLAY], then [V-OUT/PANEL]
(p. 80).
Displaying the date/time and
camera settings data – Data code
During playback, you can view the date/time
data and the camera settings data
([CAMERA DATA]) that are automatically
recorded while recording pictures on a tape or
a “Memory Stick Duo.”
1
Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
2
Touch during playback or
playback pause.
3
Touch [DATA CODE].
If the item is not displayed on the screen,
touch
/ . If you cannot find it, touch
[MENU], and select it from the
(STANDARD SET) menu.
4
Select [CAMERA DATA] or [DATE/
TIME] then touch
.
To hide the date/time or camera
settings data
Follow steps 2 and 3, and select [OFF] in step 4.
Camera settings data display
In the date/time data display, the date and time
is displayed in the same area.
If you record the picture without setting the
clock, [--- -- ----] and [--:--:--] will appear.
A SteadyShot off*
B Exposure*
C White balance*
D Gain*
E Shutter speed
F Aperture value
* Appears only during tape playback
b Note
• Camera setting data do not appear when movies on a
“Memory Stick Duo” are played back.
z Tip
• Exposure adjustment value (0EV) appears when a
“Memory Stick Duo” is played back.
• appears for the picture recorded using a flash.
DATA CODE: OFF
OFF
0:00:00:00
CAMERA
DATA
DATE/
TIME
60min
AWB 100
0dB F3. 4
60min
P-MENU
0:00:00:00
AUTO
0:00:00:00 60min
AWB 100
9dB F1. 8
AUTO