Sony DCR-HC1000 - Manual (Page 78)

Using the Menu 78
LCD BL LEVEL
You can adjust the brightness of the LCD screen’s backlight.
b Note
• When you connect your camcorder to outside power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], battery life is reduced by about 10 percent during recording.
LCD COLOR
Touch / to adjust the color on the LCD screen.
VF B.LIGHT
You can adjust the brightness of the viewfinder.
b Note
• When you connect your camcorder to outside power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], battery life is reduced by about 10 percent during recording.
A/V c DV OUT
You can connect a digital device and an analog device to your camcorder and
convert the signal transmitted from the connected devices to the appropriate signal
on your camcorder.
VIDEO INPUT
When you connect your camcorder to another device using the supplied A/V
connecting cable, set the type of plug you are going to use for the connection.
G NORMAL Standard brightness.
BRIGHT Select to brighten the LCD screen.
G NORMAL Standard brightness.
BRIGHT To brighten the viewfinder screen.
G OFF Select when not using the Signal convert function.
ON ( ) To output analog images and sound in digital format using your
camcorder.
The analog signal input to the A/V jack of your camcorder will be
converted and output from the DV Interface of your camcorder.
For details, refer to the “Computer Applications Guide.”
G VIDEO Select to input a video signal.
S VIDEO Select to input an S video signal.
Low intensity High intensity