Sony DCR-HC1000 - Manual (Page 91)

Du
b
b
in
g
/E
d
itin
g
Dubbing/Editing 91
10
Touch , then .
b Note
• You cannot dub the index screen.
• You may not be able to dub images modified on your
computer or recorded with other camcorders on your
camcorder.
• You cannot dub MPEG movies on the tape.
Dubbing selected
scenes from a tape
– Digital program editing
You can select up to 20 scenes (programs)
and record them in the desired order to other
recording device such as VCRs or to a
“Memory Stick Duo” inserted in your
camcorder.
When you are recording on a “Memory Stick
Duo,” skip steps 1 and 2 and start from
“Recording the selected scenes as programs”
(p. 95).
Step 1 : Preparing your
camcorder and VCR for operation
Follow the steps below when you are
performing a digital program edit for the first
time to a tape in a VCR. You can skip this
setting if you have set up the VCR by the
following procedure before.
b Note
• Digital program editing cannot be performed on the
following equipment:
– VCRs that do not support [IR SETUP] codes
– DVD recorders (with or without hard disk drive),
etc.
• The operating signal for the Digital program editing
cannot be transferred via the LANC jack.
1
Connect your VCR to the camcorder
as a recording device (p. 86).
Change the order
Results of editing
Delete unwanted scene
, continued