To attach the notebook to the port replicator – Sony PCG-GRX580P User Manual
Page 67
To attach the notebook to the port replicator
First, connect the supplied AC adapter or another Sony AC adapter (not supplied) to the port replicator to supply power to
the notebook once the port replicator is attached.
The port replicator can be powered only by the AC adapter, so the AC adapter must remain connected to the port replicator
at all times while it is in use. If the AC adapter is disconnected and/or the AC outlet is unplugged while using the port
replicator, the computer may malfunction and data may be lost.
1.
Turn off the notebook and disconnect all peripheral devices.
2.
Plug the AC adapter connector into the DC IN port on the port replicator, and plug the power cord into the AC
adapter and an AC outlet.
Connecting AC Adapter to Port Replicator
You will know the power is on when the green power indicator located on top of the port replicator switches on.
Power Indicator
3.
Close the tilt stands before attaching the notebook to the port replicator.
4.
Align the connector on the bottom of the notebook with the port replicator connector and push the notebook
down until it clicks into place.
Attaching Notebook to Port Replicator
5.
Turn on the notebook.
Note:
Page 67