Sony DCR-SR46BDL - Manual (Page 13)

Getting Started
13
Step 2: Charging the battery pack
DCR-SR65/SR85:
4
DCR-SR45/SR46:
You can charge the “InfoLITHIUM”
battery pack (H series) (p. 91) after
attaching it to your camcorder.
Notes

Your camcorder operates only with an
“InfoLITHIUM” battery pack (H series).
1
Turn the POWER switch in the
direction of the arrow to OFF (CHG)
(the default setting).
2
Attach the battery pack by sliding it
in the direction of the arrow until it
clicks.
3
For DCR-SR65/SR85:
Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
For DCR-SR45/SR46:
Connect the AC Adaptor to the DC
IN jack on your camcorder.
4
For DCR-SR65/SR85:
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket). Insert
the camcorder into the Handycam
Station securely, all the way to the
bottom.

When setting the camcorder onto the
Handycam Station, close the DC IN jack
cover.
For DCR-SR45/SR46:
Connect the power cord (mains
lead) to the AC Adaptor and the wall
outlet (wall socket).
The CHG (charge) lamp lights up and
charging starts.
The CHG (charge) lamp turns off when
the battery is fully charged. Disconnect

Battery pack
DC IN jack
DC plug
With the  mark
on the top
AC Adaptor
Power cord
(Mains lead)
To the wall outlet
(wall socket)
POWER
switch
Open the jack cover.
DC IN jack
DC plug
With the  mark
on the right
AC Adaptor
Power cord
(Mains lead)
To the wall outlet
(wall socket)