Sony DCR-SR46BDL - Manual (Page 46)

6
Dubbing to other devices
Connecting with the A/V connecting cable
You can dub images played back on your camcorder to other recording devices, such as
VCRs or DVD/HDD recorders. Connect the device in either of the following ways.
Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for
this operation (p. 13). Refer also to the instruction manuals supplied with the devices to be
connected.
Select beforehand the media which contains the image you want to dub (p. 20).
Notes

Since dubbing is performed via analog data transfer, the image quality may deteriorate.

 A/V connecting cable (supplied)
The Handycam Station has an A/V
OUT jack (DCR-SR65/SR85) (p. 99)
and the camcorder has an A/V
Remote Connector (p. 96). Connect
the A/V connecting cable either to
the Handycam Station or to your
camcorder, according to your setup.
 A/V connecting cable with S VIDEO
(optional)
When connecting to another device
via the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO
cable (optional), higher quality images
can be produced than with an A/V
connecting cable. Connect the white
DCR-SR45/SR46:
DCR-SR65/SR85:
Device with an
S VIDEO jack
Device without an
S VIDEO jack
A/V Remote Connector or
A/V OUT jack
: Video/Signal flow
VCRs or DVD/HDD
recorders
(Yellow)
(White)
(Red)
(White)
(Red)
(Yellow)