Sony KDL-40R450A - Manual (Page 30)

30
Wide Mode
The Wide Mode feature allows you to
select the screen display of your
preference. Based on the original signal
source, you may see black bars around
the picture or just on the both sides of the
screen. Sometimes you will see the
picture filled the full screen. This is due to
the signals your TV receives.
You can manually select available Wide
Mode settings as you watch your TV by
pressing the WIDE button on your remote
control or you can set your TV to Auto
Wide.
x To set Auto Wide
Press HOME and select Settings, then
select the Screen settings.
Select Auto Wide and set to On.
x To change the Wide Screen Mode
Press WIDE repeatedly to cycle through
the available modes.
Normal is available with 480i or 480p
sources only.
4:3 Original source 16:9 Original source
Standard-
definition source High-definition source
Wide Zoom Wide Zoom
Normal Normal
This mode is not
available.
Full Full
m m
Zoom Zoom
4:3 Original source 16:9 Original source