Registering the color tones (custom white balance), Fn button t [white balance] t, Select [ set] with b / b on the controller – Sony DSLR-A350 User Manual
Page 93: Press the center of the controller
Us
ing the shooting
function
93
*1
The value is the color temperature value currently selected.
*2
The value is the Color filter value currently selected.
In a scene where the ambient light consists of multiple types of light source,
use of custom white balance is recommended in order to accurately
reproduce the whiteness.
5500K*
1
(ColorTemperature)
Sets the white balance by the color temperature. The higher
the number, the more reddish the image and the lower the
number, the more bluish the image.
00*
2
(Color filter)
Achieves the effect of CC (Color Compensation) filters for
photography.
Based on using the set color temperature as the standard, the
color can be compensated to G (Green) or M (Magenta).
Registering the color tones (Custom white balance)
1
Fn button t [White balance] t
2
Select [
SET] with b/B on the controller.
3
Hold the camera so that the white area fully covers the spot-
metering circle and press the shutter button down.
The shutter clicks and the calibrated values (ColorTemperature and Color
filter) are displayed.
4
Press the center of the controller.
The monitor returns to the recording information display with the memorized
custom white balance setting retained.
• The custom white balance setting is registered in this operation is effective
until a new setting is registered.