Fn button t [white balance] t (custom) – Sony DSLR-A350 User Manual

Page 94

Advertising
background image

94

Note

• The message “Custom WB error” indicates that the value is beyond the expected

range. (When the flash is used on a subject in close proximity or a subject with a
bright color is in the frame.) If you register this value, the

indicator turns yellow

on the recording information display on the LCD monitor. You can shoot at this
point, but it is recommended that you set the white balance again to get a more
correct white balance value.

To call the custom white balance setting

Fn button t [White balance] t

(Custom)

Note

• If the flash is used when the shutter button is pressed, a custom white balance is

registered with the flash light taken into account. Take pictures with the flash in later
shootings.

Advertising
This manual is related to the following products: