Adjusting the viewing angle of the tv, Detaching the table-top stand from the tv – Sony KDL-46EX621 User Manual

Page 11

Advertising
background image

11

D:\Cmeng's JOB\SONY TV\SY0404_W9 (Rev-4)\4275462151_US\US03STU.fm

KDL-EX729/EX723/EX720/EX621/EX620/HX729

4-275-462-15(1)

Getting Started

Detaching the Table-Top
Stand from the TV

To detach the Table-Top Stand from the
TV, remove the screws

fixed in step 2.

For KDL-60EX72x, be sure to remove the
screws

for detaching the head when the

Table-Top Stand is not attached to the TV.
For KDL-65HX72x, be sure to remove the
screws

at the head of the Table-Top

Stand.

~

• Do not remove the Table-Top Stand for any

reason other than to install corresponding
accessories on the TV.

• When removing the Table-Top Stand from the

TV, lay the display face down on a stable work
surface that is larger than the TV.

• To prevent damaging the surface of the LCD

display, make sure to place a soft cloth on the
work surface.

• When installing the TV on a wall, remove the

screws from the rear of the TV. The screws and
number of screws depends on the TV model.
(They are fastened in the screw holes for wall
mounting.) Be sure to store the removed
screws in a safe place, keeping them away
from children.

• When attaching the Table-Top Stand again, be

sure to fasten the screws (previously removed)
to the original holes on the rear of the TV.

2: Adjusting the viewing

angle of the TV

This TV can be adjusted within the angles
as illustrated.

Angle adjustment (Swivel)
(except KDL-65HX72x/
KDL-60EX72x)

~

• When adjusting the angle, hold the stand with

one hand to avoid having the stand slip or TV
tip over.

Angle adjustment (Tilt)
(except KDL-65HX72x/
KDL-60EX72x)

Head

Soft cloth

20°

20°

20°

20°

0° - 6°

Advertising