Removing the terminal cover for monitor, Removing the terminal cover for, Monitor – Sony KDL-46XBR10 User Manual
Page 17: Installing the unit against a wall or, Enclosed area, Never install the monitor as follows, Ge tting starte d, Installed with stand, Installed on the wall, Media receiver
G
e
tting
Starte
d
17
Removing the Terminal Cover for Monitor
Installing the Unit Against a Wall or Enclosed Area
Make sure that your unit has adequate ventilation. Allow enough space around the unit as shown
below. Avoid operating the unit at temperatures below 41 °F (5 °C).
1
2
(30 cm)
11
7
/
8
inches
(6 cm)
inches
4 inches
(10 cm)
4 inches
(10 cm)
2
3
/
8
Leave at least this much space around the set.
Installed with stand
inches
11
7
/
8
4 inches
(10 cm)
4 inches
(10 cm)
4 inches (10 cm)
(30 cm)
Installed on the wall
Leave at least
this much space
around the set.
Monitor
Never install the monitor as follows:
Air circulation is blocked.
Air circulation is blocked.
Wall
Wall
2 inches
(5 cm)
2 inches
(5 cm)
2 inches
(5 cm)
2 inches
(5 cm)
2 inches
(5 cm)
Media receiver
Top
Front
Leave at least this much space around the set.
• Inadequate ventilation can lead to overheating of the unit and may cause unit damage or cause a fire.