Sony KDF-55E2000 - Manual (Page 62)

masterpage:3 columns Right
62
D:\WINNT\Profiles\noriko\Desktop\SONY TROY 2\2681559131_Troy2
EN\2681559131\01US07MEN.fm
KDF-42E2000/KDF-46E2000/KDF-50E2000/KDF-55E2000
2-681-559-13(1)
Accessing the Sound Settings
Selecting Sound
Options The Sound settings include the following options:
1. Press MENU..................
2. Select Settings...............
3. Highlight........................
4. Press to select................
To highlight an option and to change settings, press V v B b.
Press to confirm the selection.
To exit the Sound, press .
MENU
Antenna
Sound Exit:
Custom settings
MENU
Dynamic
Standard
Custom
Sound Mode Custom
Reset
Treble 0
Bass 0
Balance 0
Steady Sound Off
Volume Offset 0
Surround Off
BBE Off
MENU
Option Description
Sound
Mode Dynamic Select to enhance treble and bass.
Standard Suitable for spoken dialog.
Custom Flat setting.
Reset Reset the following options to the default setting: Treble, Bass,
Balance, Steady Sound, Volume Offset and BBE.
Treble Adjust to increase or decrease higher-pitched sounds.
Bass Adjust to increase or decrease lower-pitched sounds.
Balance Adjust to emphasize left or right speaker balance.
Steady
Sound On Select to stabilize the volume across all programs
and commercials.
Off Select to turn off Steady Sound.
Volume
Offset Adjust to increase or decrease the sound level of the current input
(TV or video input) relative to other inputs.
Surround TruSurround
XT Select for surround sound (for stereo programs
only).
Off Normal stereo or mono reception.
Select to give sound more impact by compensating for phase effects
in speakers. Select from High, Low, and Off. BBE
✍
The BBE option is not available (it is grayed out) if the
Sound Mode option is set to Dynamic or Standard. To
use BBE, set Sound Mode to Custom.
z Sound Mode settings
are independent of
settings in the
Treble/Bass options.
z TruSurround XT
attempts to create the
same surround effect
produced by a
multichannel system
using the left and right
speakers.