Sony DMX-WL1 - Manual (Page 8)

8
1
Turn the power of the TV on.
Set Control for HDMI in the Settings menu
of the TV On.
Then select the HDMI input that the receiver
unit is connected to.
TV
• If POWER LED of the receiver unit does not light up,
confirm Control for HDMI setting of the TV is On.
• The power of the receiver unit turns on or off in
conjunction with TV, if Control for HDMI setting of the
TV is On and the unit is connected to the TV by HDMI
cable.
• When Control for HDMI is enabled on your TV, the
power of the receiver unit will follow the power state of
the TV. When the TV is turned on or off, the receiver unit
will also turn on or off. To manually control the power of
the receiver unit using the receiver’s POWER button, you
must turn off the TV’s Control for HDMI.
• If Control for HDMI of the TV is Off, you must turn
the power of the receiver unit on or off by pressing the
POWER button on the unit.
• The supplied remote control cannot be used to turn on or
off the receiver unit separately from the TV.
2
Confirm the POWER LED automatically lights
up in green on the receiver unit.
POWER
4
Turning
the TV and the Transmitter unit on
3
Press POWER on the transmitter unit.
POWER
POWER button
When the power of the transmitter unit is
turned on, the POWER LED will light up in
green, along with the white lamp on the front.
POWER
White lamp
POWER LED