Sony DSC-S700BDL - Manual (Page 52)

52
For details on the operation 1 page 45 Setup 1
1
The default settings are marked with .
Selects the brightness of the LCD backlight when using the camera with batteries.
• You can change the setting by pressing DISP button longer.
• Selecting [Bright] uses up the battery charge faster.
Selects the sound produced when you operate the camera.
Selects the language to be used to display the menu items, warnings, and messages.
Initializes the setting to the default setting.
1 Select [OK] with v on the control button, then press z.
The message “Initialize all settings Ready?” appears.
2 Select [OK] with v, then press z.
The settings are reset to the default setting.
To cancel the resetting
Select [Cancel] in step 1 or 2, then press z.
• Make sure that the power is not disconnected during resetting.
LCD Backlight
Bright Brightens
Normal
Beep
Shutter Turns on the shutter sound when you press the shutter button.
On Turns on the beep/shutter sound when you press the control
button/ press the shutter button.
Off Turns off the beep/shutter sound.
Language
Initialize