Sony SLT-A77VM - Manual (Page 139)

139
Shoo
ting (Advanced op
erations)
Setting ISO
Sensitivity to light is expressed by the ISO number (recommended
exposure index). The larger the number, the higher the sensitivity.
Notes
• The recordable range of the brightness of a subject (dynamic range) is slightly
narrower for areas where ISO is less than 100.
• When the exposure mode is set to AUTO, AUTO+, Sweep Panorama, 3D Sweep
Panorama, or Scene Selection, ISO is fixed to [AUTO] and you cannot select other
ISO numbers.
• When the exposure mode is set to P/A/S and ISO is set to [AUTO], ISO is
automatically set between ISO 100 and ISO 1600.
• The [AUTO] setting is not provided in exposure mode M. If you change the
exposure mode to M with the [AUTO] setting, it is switched to [100]. Set the ISO
according to your shooting conditions.
To change the automatic adjustment range in [AUTO]
When [AUTO] is selected, press B, select [ISO AUTO Maximum] or [ISO
AUTO Minimum], then select the desired range.
1
Press the ISO button to display
the ISO screen. ISO button
2
Select the desired setting with v/V on the multi-selector.
• The larger the number, the higher the noise level.
• If you want to select [Multi Frame Noise Reduct.], display the setup screen
with B, and select the desired value with v/V.
• The number is incremented by 1/3 of a step using the rear control dial, with
similar uses as the multi-selector, and it is incremented by 1 step using the
front control dial.