Sony SLT-A77VM - Manual (Page 183)

183
Setting the method for recording on a memory card
Setup of the camera (Advanced op
erations)
When inconsistencies are found in the image database file, caused by
processing images on computers, etc., images on the memory card will not
be played back in this form. If this happens, the camera repairs the file.
MENU button t 1 t [Recover Image DB] t [Enter]
Note
• Use a sufficiently charged battery. Low battery power during repairing can cause
damage to data.
Sets whether or not you use the upload function when using an Eye-Fi card
(commercially available). This item appears when an Eye-Fi card is
inserted in the camera.
MENU button t 2 t [Upload Settings] t Select the desired
setting
The status indicators in communication
Notes
• Before using an Eye-Fi card, set up the wireless LAN access point and forwarding
destination. For details, refer to the operating manual supplied with the Eye-Fi card.
• Eye-Fi cards are sold in the U.S.A, Canada, Japan, and some countries in the EU (as
of March in 2011).
• For more information, please contact the manufacturer or vendor directly.
• Eye-Fi cards can be used only in the countries/regions where they were purchased.
Use Eye-Fi cards in accordance with the law of the countries/regions where you
purchased the card.
• Eye-Fi cards include a wireless LAN function. Do not insert any Eye-Fi cards in the
camera when it is prohibited to do so, such as on an airplane. If there is an Eye-Fi
Recover Image DB
Upload Settings
Standby. No images are to be sent.
Upload standby.
Connecting.
Uploading.
Error.