Preparing for wall mounting, How to use – Sony SVL241190X User Manual

Page 218

Advertising
background image

VAIO User Guide SVL2411 Series

Back

|

Back to Top

Troubleshooting

How to Use

Parts Description

Setup

Network / Internet

Connections

Settings

View

Playback

Backup / Recovery

Security

Other Operations

Notifications

MONITOR Function

Preparing for Wall Mounting

Your VAIO computer can be mounted on a wall using a wall mounting bracket (not supplied).
It is recommended that you use the Sony SU-WL100 wall mounting bracket.
Please use four M4 screws (not supplied) which are compliant with the Video Electronics
Standards Association (VESA) standard mounting hole pattern 100mm × 100mm for
installing the computer to your mounting bracket.

Note

The weight of your VAIO computer is within the range of supported weight of your
mounting bracket. See the manual that came with your mounting system for the weight
information.
While your VAIO computer is wall mounted, do not place any objects on top of the
computer so as not to break the frame and cause the main unit to fall from the wall,
resulting in damage to the computer or personal injuries.

1. Turn off your VAIO computer and peripheral devices, and disconnect the power cord

and all connection cables.

2. Wait for a while until the computer cools down.

The inner parts of the computer may be hot just after turning off. Be careful to avoid
burns while handling the computer in this state.

3. Remove the back panel of the computer.

4. Lay a clean cloth on a level, flat surface, place the computer on it.
5. Remove the seven screws (1) with a cross slot screwdriver and take the foot stand (2)

off the computer.

218

Click to Search

Advertising
This manual is related to the following products: