Troubleshooting audio, My speakers have no sound – Sony PCG-R505DLP User Manual

Page 132

Advertising
background image

VAIO® R505 SuperSlim Pro™ Notebook Quick Start

132

Troubleshooting Audio

My speakers have no sound.

If the built-in speakers are turned off, press the Fn+F3 keys or use the center
Jog Dial control to turn on the speakers.

If the speaker volume is turned to the minimum, press the Fn+F4 keys, then
press

or

to increase the volume, or you can use the center Jog Dial™

control to control the volume.

If nothing is displayed when you press the Fn+F3 or Fn+F4 keys, proceed as
follows:

1

Click Start, and then Control Panel.

2

Click Sounds, Speech, and Audio Devices. The Sounds, Speech, and
Audio Devices window opens.

3

Select the Audio tab, and click Advanced in the Sound Playback box.
The Advanced Audio Properties dialog box appears.

4

Make sure the Speakers tab is open, and the correct speaker setup is
selected in the Speaker Setup box. Click OK.

5

Click Volume in the Sound Playback box. The Volume Control dialog
box appears.

6

Make sure the mute check boxes are not selected in the Volume Control
and Stereo Wide columns.

7

Close the Volume Control dialog box.

8

Click OK.

Make sure the CD audio enable is turned on

1

Click Start on the Windows® taskbar, and then Control Panel.

2

Click Performance and Maintenance, and then System. The System
Properties window opens.

3

Select the Hardware tab and then click Device Manager. The Device
Manager window opens, listing your notebook hardware devices.

4

Double-click DVD/CD-ROM drives.

5

Double-click the appropriate drive name.

Advertising
This manual is related to the following products: