Sony PCG-R505DLP User Manual
Page 72
Change text in this variable definition to document title.
72
If your notebook is connected to the docking station
If you want to exchange data with another computer using the optional i.LINK
cable and your notebook is connected to the docking station, perform the
following:
1
Disconnect your notebook from the docking station as described in the
“Disconnecting the notebook from the docking station” section.
2
Disconnect the AC adapter and all cables from the docking station.
3
Using a thin pen tip, set the i.LINK network switch on the bottom of the
docking station to the side marked .
4
Connect the docking station to your notebook as described in the
“Connecting the notebook to the docking station” section.
5
Turn on the notebook, and use the i.LINK cable to connect your notebook to
another computer.
6
After you have finished the “smart connect” session tasks, proceed as
follows:
❑
Disconnect your notebook from the docking station.
❑
Disconnect the i.LINK cable and all other cables from the docking
station.
Do not set the i.LINK network switch when the notebook is on. The notebook
will malfunction.
i.LINK Network Switch
i.LINK Network Switch