Sony KDL-46W5150 - Manual (Page 21)

O
p
er
a
ting the
T
V
21
TV Controls and Indicators
PIC OFF / TIMER POWER/STANDBY
INPUT
POWER
CHANNEL
VOLUME
HOME
HD SIGNAL
1
3 4 5
6
7
8
9
q;
2
Item Description
1 Speaker Outputs audio signal.
2 PIC OFF/
TIMER
Lights up in orange when the Timer or Sleep Timer is set. Lights up and/or blinks
in orange during a software upgrade.
Lights up in green when the Power Saving is set to Picture Off.
3 HD SIGNAL Lights up when the TV receives HD signal including up converted signals.
4 POWER/
STANDBY
Lights up in red when your TV is in PC power saving mode or during the software
upgrade. Lights up in green when the TV is turned on. If the LED blinks in red
continuously, this may indicate that the TV needs servicing (see contacting Sony
information on the front cover).
5 (IR) Infrared
Receiver
Receives IR signals from the remote control. Do not block this area, as it may
interfere with remote control operation.
Light Sensor Senses room light level and adjusts the screen brightness accordingly. Do not put
anything near the sensor or the nearby general area (as shown above), as its function
may be affected.
6 POWER Press to turn on and off the TV.
7 – CHANNEL +
Press to scan through channels. To scan quickly through channels, press and hold
down either +/–. In the MENU screen, these buttons serve as up/down buttons.
8 – VOLUME + Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons.
9
INPUT
Press to display the list of inputs or confirm your selection. Press repeatedly to toggle
through the inputs.
~
• Inputs can be changed by pressing V/v and while the list of external inputs is
displayed.
• Refer to page 33 for information about setting up the external inputs labels.
In the MENU screen, this button serves to confirm the selection or setting.
0 HOME Press to display TV Home Menu/XMB
™
to access TV Settings and other media
and network related content.