Sony DVP-SR200PPX3 - Manual (Page 11)

H
ook
up
s
11 US
Controlling your TV with the
supplied remote
You can control the sound level, input source,
and power switch of your Sony TV with the
supplied remote.
You can control your TV using the buttons
below.
b
Depending on the connected unit, you may not be
able to control your TV using all or some of the
buttons on the supplied remote.
To control other TVs with the remote
You can control the sound level, input source,
and power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer’s code.
1
While holding down TV [/1, press the
number buttons to select your TV’s
manufacturer’s code (see the table
below).
2
Release TV [/1.
◆Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
b
• When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
• Depending on the connected unit, you may not be
able to control your TV using all or some of the
buttons on the supplied remote.
By pressing You can
TV [/1 Turn the TV on or off
VOL +/– Adjust the volume of the TV
TV INPUT
(input select) Switch the TV’s input source
between the TV and other
input sources
TIME/TEXT
PICTURE
NAVI
CLEAR
DISPLAY
AUDIO SUBTITLE
TOP MENU MENU
RETURN
TV TV
TV INPUT TV
VOL +/–
Number
buttons
Manufacturer Code number
Sony 01 (default)
Hitachi 02
LG/Goldstar/NEC 04
MGA/Mitsubishi 13
Panasonic 19
Philips 21
Pioneer 16
RCA 10
Samsung 20
Sharp 18
Toshiba 07