Sony PCG-F360 - Manual (Page 87)

77
Typical expansion memory configuration
† 64 MB is the default memory amount.
To install a memory module
1
Shut down your computer and disconnect all peripheral devices,
such as your printer.
2
Unplug your computer and remove the battery packs.
3
Wait until the computer cools down. Then open the internal speaker
cover by unscrewing the left side of the cover.
4
Slide the internal speaker cover to the right, then lift it away from the
computer. Be careful not to detach the cable when lifting the cover.
Total System Memory
(MB) On-board (MB) Slot (MB)
64
†
64 Empty
80 64 16
96 64 32
128 64 64
192 64 128
internal
Turn screw
counter-clockwise. speaker
cover
cable