Sony KDL-46S5100 - Manual (Page 19)

Usin
g F
e
at
ures
19
Wide Mode with PC
Changing the Wide Screen Mode for
PC Timing
Press WIDE repeatedly to cycle
through the available modes while in
the PC input mode.
~
Full Pixel displays the picture in its
native resolution.
PC and HDMI Input Signal Reference Chart
After connecting the PC to the TV, set the output signal from the PC according to the chart below.
~
• This TV’s PC input does not support Sync on Green or Composite Sync.
• This TV’s PC VGA input does not support interlaced signals.
Resolution
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Standard Signals Horizontal
(Pixel)
× Vertical
(Line)
VGA 640
×
480 31.5 60 VGA
SVGA 800
×
600 37.9 60 VESA Guidelines
XGA 1,024
×
768 48.4 60 VESA Guidelines
WXGA 1,280
×
768 47.8 60 VESA
1,360
×
768 47.7 60 VESA
SXGA 1,280
×
1,024 64.0 60 VESA
HDTV 1,920
×
1,080 67.5 60 CEA-861
Incoming PC signal Incoming PC signal
m m
Wide Zoom Wide Zoom
Normal Normal
Full Full
Zoom Zoom
Full Pixel Full Pixel
800 Ч 600 1,280 Ч 768
• Adjust Phase to eliminate horizontal lines of the picture when the TV receives an input signal
from the connected PC.