Sony PCG-F450 - Manual (Page 91)

Adding Memory &
6
Tighten the screw on the bottom of the computer.
To install a memory module
1
Follow steps 1 to 4 of “To remove a memory module.”
2
Remove the memory module from its packaging.
3
Install the memory module.
4
Tighten the screw on the bottom of the computer.
To view the amount of memory
1
Turn on the computer.
2
Click the Start button, point to VAIO, and click “Sony Notebook
Setup.” The Sony Notebook Setup screen appears.
3
Click the “About This Computer” tab to view the amount of system
memory. If the additional memory is not shown, repeat steps 1-4 in
“To install a memory module.”
✍
Your computer comes with a memory module installed in the memory slot. To upgrade your
memory you will need to remove this module from the slot before installing your upgrade
memory.
1 Slide the memory module into the slot. 2 Press the module into place until it clicks.