Sony bloggie MHS-PM1 User Manual
Page 24
24
MHS-PM1
4-135-531-11(1)
J:\ichihashi\works\cx20300\paper\4135531111MHSPM1\030FNC.fm
master:Left
Display: DirectX 7 or later-compatible
video card, Minimum 1,024
×
768 dots
Others: USB port (this must be
provided as standard, Hi-Speed USB
(USB 2.0 compatible))
* For “PMB Portable”, the disk volume required
on using the program temporarily is
approximately 1 GB.
[ Note on playback of movie files
(MPEG-4 AVC/H.264)
To play back and editing movie files
(MPEG-4 AVC/H.264) recorded by the
camera, you need to install the software
compatible with MPEG-4 AVC/H.264 or
“PMB” on your computer.
• Even under a PC environment where operations
are guaranteed, sometimes images cannot be
played back smoothly due to dropped frames.
Note that the transferred image itself is not
affected.
• If you are using a notebook PC, be sure to use
the PC with the AC adaptor plugged in.
Sometimes normal operations are not possible
due to the power savings function of the PC.
b
Note
• Operations are not guaranteed, even on
computers fulfilling the above system
requirements. For example, other open or
background applications currently running may
limit product performance.
[ Installing “PMB”
You can install “PMB” using the following
procedure.
• Log on as Administrator.
1
Turn on your computer, and insert the
CD-ROM (supplied) into the CD-ROM
drive.
The installation menu screen appears.
• If it does not appear, double-click [Computer]
(in Windows XP, [My Computer])
t
(SONYPICTUTIL).
• The AutoPlay screen may appear. Select “Run
Install.exe.” and follow the instructions that
appear on the screen to proceed with the
installation.
2
Click [Install].
The “Choose Setup Language” screen appears.
3
Select the desired language, then click
[Next].
The “License Agreement” screen appears.
4
Read the agreement carefully. If you
accept the terms of the agreement, click
the radio button next to [I accept the
terms of the license agreement] and then
click [Next].
5
Follow the instructions on the screen to
complete the installation.
• When the restarting confirmation message
appears, restart the computer following the
instructions on the screen.
• DirectX may be installed depending on the
system environment of your computer.
6
Remove the CD-ROM after the
installation is complete.