Setting up the channel list - initial setup, Setting up the channel list, Initial setup – Sony KDL-40SL130 User Manual

Page 21: Setting up the channel list – initial setup

Advertising
background image

F:\Worker\SONY WAX3 EN 17(1)\3196472171(071107)\050GET.fm

masterpage:Right

21

Getti

ng Sta

rted

KDL-26S3000/KDL-32S3000/KDL-40S3000/KDL-46S3000/

KDL-32SL130/KDL-40SL130

4. Setting Up the Channel List
– Initial Setup

The Initial Setup screen appears when you turn
on the TV for the first time.

After you finish connecting the TV, you can run
Initial Setup to create a list of available analog
and digital channels if you have connected an
antenna or cable directly to the TV’s VHF/UHF/
CABLE input.

You will be prompted to select the language of
your choice to be used for all the on-screen
settings.

Use the remote control to navigate through the
Initial Setup:

Follow the help text provided on the screen to run
Auto Program with the connected signal source
or select Skip to skip the Auto Program if you
are receiving channels from a cable box or satellite
receiver and the VHF/UHF/CABLE input is not
connected. The Auto Program will scan for
available channels. When the Auto Program is
completed, the TV will display how many analog
and digital channels are found.

~

• If you accidentally turn off the TV during the Initial

Setup process, the Initial Setup will restart from the
beginning when the TV is turned back on.

• The Auto Program may be canceled while the

channels are being scanned. Press RETURN first then
press either

B/b on the remote control, highlight “Yes”

to cancel or “No” to resume Auto Program.

s To Run Initial Setup Again or Auto

Program at a Later Time

Select the Initial Setup feature from the XMB

(XrossMediaBar) or refer to the Initial Setup
described on page 40. To run Auto Program, see
page 35.

s To Add Digital Channels

Use the Add Digital Channels feature as described

on page 35. (Useful for antenna installations.)

s To Display the Picture in Your Preferred

Aspect Ratio

Select the proper Wide Mode as described on pages

24 and 32.

You may want to set up convenient features such
as Favorites (see page 23), Show/Hide
Channels
(page 35), Edit Channel Labels
(page 35) when Auto Program is completed.

V/v button:

Allows you to highlight options
where applicable.

button:

Allows you to select the
highlighted option and advance
to the next screen.

B button:

Allows you to move back to the
previous screen.

b button:

Allows you to move to the next
screen.

Step 1 of 5

Initial Setup

Please select a language. Language settings will apply to

on screen display as well as default audio for digital

channels. Highlight a choice and press to continue.

English

Español

Français

HOME

Advertising