Sony PEG-NX60 - Manual (Page 30)

30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
You cannot beam data
An event created in the Date Book application cannot be
listed in the week view
B In the Week view, you cannot select overlapping events that have the same
start time. If you have two or more events with the same start time, choose
the
Day view to see overlapping events.
The vCard data imported from the Address application in
your CLIÉ handheld by beaming cannot be read by the
Palm™ Desktop for CLIÉ software
B The vCard data created with the Address application in your CLIÉ
handheld cannot be read by the Palm™ Desktop for CLIÉ software. When
you want to transfer Address data, perform a HotSync
®
operation.
(The vCard data created with the Palm™ Desktop for CLIÉ software can
be read by the Address application in your CLIÉ handheld.)
Issues to be verified at first
B Tap General in the Preferences screen and check whether the Beam
Receive is on.
B The IR port of both the devices must be facing each other.
Always place your CLIÉ handheld facing the IR port of the Palm OS
®
PDA device.
B The distance between the two devices is not correct.
Confirm that your CLIÉ handheld and the other Palm OS
®
PDA devices
are between 4 inches (approximately 10 centimeters) and 8 inches
(approximately 20 centimeters) apart, and that the path between the two
handhelds is clear of obstacles. The beaming distance to other Palm OS
®
PDA devices or to the computer, etc., varies depending on the
compatibility between the devices. Change the distance and then try again.