Sony PEG-TG50 - Manual (Page 13)

Before You Begin
Page 13
10. If a Conflict Resolution dialog box appears, resolve “data
conflicts” (see note below).
When the operation is complete, your handheld will display the
message HotSync complete.
If any errors are reported during the operation, click the HotSync Log
button on the handheld when the operation is finished. This will
display information on the errors.
Notes:
For each set of data you synchronize, a history file is used to
determine the changes that must be made in each of your systems
to achieve synchronization. This file is created by the first
synchronization of the data. Therefore, a first run synchronization
is different from (and may take longer than) subsequent
synchronizations.
First run synchronizations simply merge your handheld and PC
data, and a Conflict Resolution setting is used to resolve data
conflicts.
See “The Conflict Resolution Tab” in Chapter 3 for information
on data conflicts and the Conflict Resolution setting.
For information on how history files are used in the process of
synchronization, refer to “Synchronization and History Files” in
Chapter 4.
If you have not
already done so, read
“The HotSync
Manager” in Chapter
1 for important details
on the HotSync
Manager application.