Sony PEG-TG50 - Manual (Page 14)

Intellisync Lite
Page 14
Re-Running the Operation
Now that you have configured a synchronization, re-executing the
operation is basically a one step operation.
Simply press the HotSync button on the cradle (with the handheld
in the cradle and the cradle connected to your PC), and
synchronization begins.
You’ll only need to access the Intellisync dialogs again if you want to
change the nature of the operation.
Synchronization Notes:
• In order to run an Intellisync synchronization, your handheld
must communicate with your PC. For this to occur, your
handheld must be properly fitted into the handheld cradle, and
the cradle serial cable must be securely attached to an available
serial port on your PC. For complete details on connecting your
handheld to your PC, refer to your handheld handbook.
• Be sure to read the Supported Systems Help topic for the PC
application(s) you are using. Supported Systems topics contain
important information on how Intellisync works with each of the
PC applications it supports.
• Data can be transferred between records in your handheld and PC
applications because fields in the two systems are “mapped”
(linked). Intellisync provides default “field mapping,” but you
can alter mapping to re-direct (or prevent) the flow of data during
data transfers. Refer to “The Field Mapping Dialog” in Chapter 3
for details.
• When you synchronize a handheld application, it is automatically
synchronized with all sections in the selected PC application that
are compatible with the handheld application. For example, if
you select the handheld Date Book application and Lotus
Organizer, handheld Date Book records are synchronized with
records in the Lotus Organizer Anniversary, Calendar, and
Planner sections.
Refer to “Frequently
Asked Questions” in
Chapter 5 if you have
any trouble running a
successful
synchronization. The
problem you’re having
may be addressed
there.