Adjusting the viewing angle of the tv, Detaching the table-top stand from the tv – Sony KDL-47W802A User Manual

Page 11

Advertising
background image

D:\SONY TV\SY130033_H15\4464397111_US\US03STU.fm

KDL-55W802A/47W802A

4-464-397-11(1)

11

Getting Started

To detach the Table-Top Stand from the TV,
remove the screws

fixed in step 2.

~

• Do not remove the Table-Top Stand for any

reason other than to install corresponding
accessories on the TV.

• When removing the Table-Top Stand from

the TV, lay the display face down on a stable
work surface that is larger than the TV.

• To prevent damaging the surface of the LCD

display, make sure to place a soft cloth on
the work surface.

• Be sure the TV is vertical before turning on.

To avoid uneven picture uniformity do not
power on the TV with the LCD panel facing
down.

• When installing the TV on a wall, remove the

screws from the rear of the TV. Be sure to
store the removed screws in a safe place,
keeping them away from children.

• When attaching the Table-Top Stand again,

be sure to fasten the screws (previously
removed) to the original holes on the rear of
the TV.

2: Adjusting the

viewing angle of
the TV

This TV can be adjusted within the angles as
illustrated.

x

Angle adjustment (Swivel)

~

• When adjusting the angle, hold the stand

with one hand to avoid having the stand slip
or TV tip over.

* The angle is approximate value.

Detaching the Table-Top
Stand from the TV

×

2

Soft cloth

*15°

*15°

*15°

*15°

Advertising
This manual is related to the following products: