Sony KDL-40BX450 - Manual (Page 41)

41
Usin
g the
Me
nus
Using the Channel Settings
• You should run Auto Program after changing the Signal Type setting.
• Running Auto Program will clear the Favorites list.
• Channels that you set to be hidden can be accessed by the 0-9 and
buttons.
• You can set channels to be hidden that are automatically set in Auto Program.
Option Description
Signal Type Cable Select if you are receiving cable channels via Cable TV
provider.
Antenna Select if you are using an antenna.
Auto Program Automatically sets up the channel list on the TV for all receivable channels.
1
Select Auto Program.
2
Select OK to start Auto Program.
Add Digital
Channels
1
Select Add Digital Channels.
2
Select OK to add digital channels.
Show/Hide
Channels Allows you to show or hide channels that appear when you use the CH +/–
buttons.
1
Press V/v to scroll through the channels until you find the channel you
want to show or hide. Then press to select it.
2
Press V/v to determine if the channel will be shown or hidden. Then press
to select it.
Edit Channel
Labels Allows you to assign labels (such as station call letters) to channel numbers.
1
Press V/v to scroll through the channel numbers. Then press to
select the channel number that you want to assign a label.
2
Press V/v to scroll through the label characters (A-Z, 0-9, etc.). Press b to
move to the next character. Repeat the previous steps to add up to seven
characters to the label. When finished, press
.
Analog Fine
Tune Allows you to fine-tune the selected analog channel manually if you feel that a
slight tuning adjustment may improve picture quality. Select Auto to adjust to
the most appropriate analog channel.