Sony NWZ-S616FSLV - Manual (Page 10)

NWZ-S515/S516/S615F/S616F/S618F.GB.3-219-717-11(1)
10 10
 Headphone jack
For connecting the headphones.
Insert the jack pin until it clicks into
place. If the headphones are
connected improperly, the sound
from the headphones may not sound
right.
 Strap hole
This is used to attach a strap (sold
separately).
 HOLD switch
You can protect the player against
accidental operation by using the
HOLD switch when carrying it. By
sliding the HOLD switch in the
direction of the arrow, all operation
buttons are disabled. If you slide the
HOLD switch to the opposite
position, the HOLD function is
released.
 Display
The display may vary, depending on
functions ( page 11).
 VOL + * 2 /– button
Adjusts the volume.
 OPTION/PWR OFF button * 1
Displays the option menu ( page
18).
If you press and hold the OPTION/
PWR OFF button, the screen turns
off and the player enters the standby
mode. If you press any button while
the player is in the standby mode,
the “Now Playing” screen, etc.,
appears and the player is ready for
operation. Furthermore, if you leave
the player in the standby mode for
about a day, the player turns
completely off automatically. If you
press any button when the player is
turned off, the start up screen
appears first, then the “Now Playing”
screen appears.
Note
 The player consumes battery power very
slightly even when it is in the standby
mode. Therefore, the player might
turn completely off in a short time,
depending on the power remaining in
the battery.
* 1 Functions of marked with on the
player are activated if you press and hold
the corresponding buttons.
* 2 There are tactile dots. Use them to help
with button operations.
Table of Cont
ents
Men
u
Inde
x