Sony SLT-A37 - Manual (Page 25)

25
Attaching a lens
P
repar
in
g t
he
camera
• Do not hold the part of the lens that is extended for the zoom or focus adjustment.
To remove the lens
To attach a lens hood
Notes
• A lens hood is not included with the DT 18-55mm F3.5-5.6 SAM. You can use the
ALC-SH108 (sold separately).
• The lens hood may block the light of the flash. Remove the lens hood when using the
flash.
1 Press the lens release button
all the way in and turn the
lens counterclockwise until it
stops.
Lens release button
2 Attach the caps to the front
and rear of the lens and the
body cap to the camera.
• Before you attach them, remove dust
from them.
• A rear lens cap is not supplied with
the DT 18-55mm F3.5-5.6 SAM Lens
Kit. When you store the lens without
attaching it to the camera, purchase
the Rear Lens Cap ALC-R55.
It is recommended that you use a lens
hood to reduce flare and ensure
maximum image quality.
Fit the hood into the mount on the end of
the lens barrel and rotate the hood
clockwise until it clicks.