Recording on a tape manually, Manual recording, Sound adjustment – Sony LBT-XGR600 User Manual

Page 15: Adjusting the sound

Advertising
background image

T

a

pe
– Re

cor

d

ing

/Soun

d Adju

stme

nt

15

GB

You can record just the portions you like from a
CD, tape or radio program on a tape. You can
also record from connected components (see
“Recording audio from a connected component”
on page 25)
.

1

Load a recordable tape into deck B.

2

Press FUNCTION or TUNER/BAND
repeatedly to select the desired source
to record.

3

Press

z

REC.

Deck B stands by for recording.

When you want to record on the reverse
side, press h.

4

Press DIRECTION repeatedly to select

g

to record on one side. Select

j

(or RELAY) to record on both sides.

5

Press

X

, then start playing the desired

source to record.

Recording starts.

To stop recording

Press x.

Note

You cannot listen to other sources while recording.

Tips

• When you record on both sides, be sure to start from

the front side. If you start from the reverse side,
recording stops at the end of the reverse side.

• For recording from the tape:

If you set the direction to

j

(or RELAY) when the

tapes you use have different lengths, the tapes in each
deck reverses independently.

• For recording from the radio:

If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.

You can reinforce the bass and create a more
powerful sound.

Press X-GROOVE.

Each time you press the button, the display
changes as follows:

X-GROOVE ON (on)

Y

X-GROOVE OFF (off)

Tip

Factory set to “X-GROOVE ON”.

Recording on a tape
manually

— Manual Recording

Sound Adjustment

Adjusting the sound

continued

Advertising
This manual is related to the following products: