Sony LBT-XGR600 - Manual (Page 16)

16 GB
You can create a personal file of audio patterns
(surround effect and graphic equalizer) and store
them in the system’s memory. Later, you can
call up an audio pattern when playing a favorite
tape, CD, or radio program.
Before operating, first select the basic audio
emphasis you want for your sound.
1
Press </, to select the frequency
range, and then press M/m to adjust
the level.
2
Press and hold P FILE until “MEMORY”
appears.
3
Press ENTER.
This setting is automatically stored as a
personal file.
The setting previously stored at this
memory location is erased and replaced by
the new settings.
Other operations
Selecting the preset effect from
the music menu
Press the PRESET EQ button you want.
The preset effect name appears.
See the chart “Music menu options.”
Music menu options
“SUR ” appears if you select an effect with
surround effects.
* except for LBT-XGR88 and XGR66
Other operations
Tip
You can also select the preset effect including the
personal file by pressing FILE SELECT +/– on the
remote repeatedly.
Making a personal audio
emphasis file
— Personal File
To Do this
Call up a
personal file Press P FILE.
Cancel a personal
file Press EFFECT repeatedly until
“EFFECT OFF” appears.
ALL 1 DISCS
Frequency range Frequency level
Selecting the audio
emphasis effect
Effect For
SALSA
REGGAE
TANGO
MOVIE
SAMBA*
ROCK*
JAZZ*
DANCE*
POP*
standard music sources
GAME soundtracks and special listening
situations
To Do this
Select a personal
file Press P FILE.
Cancel the effect Press EFFECT repeatedly until
“EFFECT OFF” appears.