Sony NAC-SV10I - Manual (Page 11)

ModelName: Network Audio Remote_E
PartNumber: A-DVK-100-12(1)
 
Troubleshooting
After starting this application, an error message appears and then the application
quits.

Confirm that the Wi-Fi icon is displayed in the status bar. Make sure the Wi-Fi
setting of this unit is on. For details, refer to the operating manual of this unit.
This unit cannot connect to your home network.

See “After starting this application, an error message appears and then the
application quits.”

Make sure the wireless network settings are correct. For details, refer to the
operating manual of iPhone/iPod touch. Also refer to
http://www.sony.net/audio/netsettings
Devices are not displayed on the source selection screen or the player selection
screen.

Check the connection of the power cable, the network, and the source/(network
controlled) player unit.

Check the access permission settings. Also refer to the operating manual of the
source/(network controlled) player unit and see
http://www.sony.net/audio/netsettings
Content list is not displayed.

See “Devices are not displayed on the source selection screen or the player selection
screen.”

Turn on Remote UI mode to individually display music content on iPod/iPhone
mounted to NAS-SV10i/SV20i/SV20Di.
There is no sound after a playback operation.

The content may be not supported by the device. Also refer to
http://www.sony.net/audio/netsettings

Make sure the speaker button is activated.

Check the volume settings.