Printing from a bluetooth-compliant device, Compatible profiles for bluetooth communication, Printing procedures – Sony DPP-FP70 User Manual

Page 36: Bluetooth device, From a bluetooth device, Printing from a bluetooth-compliant, Device

Advertising
background image

36

GB

Printing from a
Bluetooth-compliant
device

By connecting the Sony DPPA-BT1
Bluetooth USB adaptor to your printer,
you can print an image of a Bluetooth-
compliant mobile phone, digital camera,
or other device.

Notes

• Do not use the DPPA-BT1 outsides the area

you purchased it. Depending on the areas, the
use of the adaptor may infringe the wave
regulations and may be subject to its penalty.

• In some regions, the Sony DPPA-BT1

Bluetooth USB adaptor is not sold.

Compatible profiles for
Bluetooth communication

The DPPA-BT1 adaptor supports the
following profiles:

• BIP (Basic Imaging Profile)
• OPP (Object Push Profile)
For the profiles that your Bluetooth device
supports, please refer to its manual.

What is “Profile”?

Standards that enable the Bluetooth
wireless communication. There are several
profiles depending on the purposes and
product profiles to be used. To make the
Bluetooth communication possible, the
devices to be communicated should
support the same profile.

Compatible image file formats to be
printed

JPEG: DCF 2.0 compatible, Exif

2.21

compatible, JFIF

(4:4:4, 4:2:2, 4:2:0

formats Baseline JPEG)

TIFF:

Exif 2.21 compatible

BMP: 1, 4, 8, 16, 24, 32 bit Windows

format

Some image file formats are not
compatible.

Maximum number of pixels to be
handled

8 000(H) x 6 000(V) dots (Maximum 5 MB
or less)

Printing procedures

When printing from a PictBridge/EXT
INTERFACE connector, make sure to
remove memory card(s) from the printer
in advance.

1

Connect the printer to the AC
power source.

2

Press the 1 (on-standby) switch to
turn on the printer.

3

Insert the Bluetooth adaptor to
the PictBridge/EXT INTERFACE
connector of your printer.

Note

In case any device, other than the
Bluetooth adaptor, such as a memory card,
camera, PC, or other external device or a
USB cable is connected to any of the
memory card slots, the PictBridge/EXT
INTERFACE connector, or USB connecter
of your printer, remove it from the printer
and then connect the Bluetooth adaptor.

4

Print from the Bluetooth-
complaint mobile phone, or other
device.

Advertising
This manual is related to the following products: