Installing the picture motion browser, Picture motion browser, Printer driver – Sony DPP-FP70 User Manual

Page 42

Advertising
background image

42

GB

Uninstalling the printer driver

Remove the printer driver as follows:

1

Disconnect the USB cable (not
supplied) from your printer and
the PC.

2

Click “Start” - “Printers and
Faxes”.

3

Select “DPP-FP70” or “DPP-FP90”,
and click “Delete” from the “File”
menu.

The confirmation dialog box is
displayed.

4

Click “Yes”.

5

Check to see that “DPP-FP70” or
“DPP-FP90” is removed from the
“Printers and Faxes” window.

6

Click ”Server Properties” from the
“File” menu, and click “Drivers”
tab in the “Printers Server
Properties” window.

7

Select “Sony DPP-FP70” or “Sony
DPP-FP90” from the list box and
click “Remove”.

The confirmation dialog box is
displayed.
When using the Windows Vista,
deletion may not be possible. You can
safely leave it as it is.

8

Click “Yes”.

9

Click “Close” to close the “Printers
Server Properties” window.

10

Click “Start” - “Control Panel”.

The Control Panel window is
displayed.

11

Open “Add or Remove
Programs.”

12

Select “Windows Driver Package –
Sony DPP-FP60/70/90” and click
“Change/Remove”.

The confirmation dialog box is
displayed.

13

Click “Yes”.

Installing the Picture Motion
Browser

Follow the procedures below to install the
Picture Motion Browser.

Notes

• When using the Windows Vista/XP/2000, log

on to Windows as a “Computer
administrator” user account.

• Be sure to close all running programs before

installing the software.

• The dialog boxes in this section are those in

Windows XP, unless otherwise specified. The
installation procedures and the dialog boxes
shown differ depending on the operating
system.

1

Turn on your PC, start Windows,
and insert the supplied CD-ROM
into the CD-ROM drive of your PC.

The installation window is displayed
(page 40).

2

Click “Installing Picture Motion
Browser”.

The “Choose Setup Language” dialog
box is displayed.

3

Select your language and click
“Next.”

The “Location settings” dialog box is
displayed.

4

Select the “Region” and
“Country/Area” where you use
the printer and click “Next.”

The “InstallShield Wizard” dialog box
is displayed.

Advertising
This manual is related to the following products: