Sony LBT-LCD77Di - Manual (Page 32)

MHC-GZR333i/LBT-LCD77Di.GB.4-181-572-11(1)
 GB
Setting the clock
Use buttons on the remote to set the
clock.
1
Press / to turn on the system.
2
Press TIMER MENU.
The hour indication flashes in the
display.
If “PLAY SET?” flashes in the display,
press  or  repeatedly to select
“CLOCK SET?,” then press ENTER.
3
Press  or  repeatedly to set
the hour, and then press ENTER.
4
Use the same procedure to set
the minutes.
Note
The clock settings are canceled when you
disconnect the power cord or if a power failure
occurs.
To display the clock when the system
is off
Press DISPLAY repeatedly until the clock
is displayed.
The clock is displayed for about
8 seconds.
Setting the LCD
The default setting is underlined.
PICTURE MODE
Allows you to select options best suited
for videos and pictures, respectively.
STANDARD: For standard pictures.
Recommended for home entertainment.
VIVID: Enhances picture contrast and
sharpness.
CINEMA: For viewing film-based
content.
PHOTO: For viewing photographs.
WIDE MODE
FULL: Select this when you view pictures
in a 16:9-format. This setting displays
pictures in full screen mode.
NORMAL: Select this when you view
pictures in a 4:3-format. This setting
displays a normal picture with bands on
the left and right portions of the screen.