Sony ICD-MS515VTP - Manual (Page 153)

1 2 Using Portable Recorders (Preferred and higher)
Dragon NaturallySpeaking User’s Guide 147
Click the Browse button to locate the sound file.
If you are transcribing a wave file, make sure the file is in the following format: PCM,
11.025 or 22.050 kHz, 16 Bit, Mono.
If you want to change the target window of the transcription, specify which
commands Dragon NaturallySpeaking will understand or change the recorder-
specific options and click the Advanced button. For a more detailed description of
the options, see the “The Advanced Settings dialog box” on page 148.
4 What you see next, depends on your recorder:
After transcription, your recorded speech should appear on the screen. If text doesn’t
appear, see “Troubleshooting” on page 150.
Dragon NaturallyMobile recorder or the ScanSoft Voice Recorder
If you are using the Dragon NaturallyMobile recorder or the ScanSoft Voice
Recorder, the Select Files for Transcription dialog box opens.
With the Dragon NaturallyMobile recorder or the ScanSoft Voice Recorder, select
the file or files you want to transcribe, and click the Transcribe button. You can only
transcribe the.uwv format with this dialog
You can also select the memory location of the Pocket PC folder if the file you want
is not displayed in the list. You can store recording in either the device's internal
memory or in a memory card, if you have one attached to your device.
NOTE
NOTE