Sony ICD-MS515VTP - Manual (Page 144)

1 2 Using Portable Recorders (Preferred and higher)
Dragon NaturallySpeaking User’s Guide 138
Installing recorder software
Some recorders require additional software to work with Dragon NaturallySpeaking.
If you are using a:
■ Sony ® ICD-BP recorder, you must install the Sony ® Digital Voice Editor
software. For more information, see the documentation that came with your
recorder.
■ Sony ® Memory Stick ™ IC Recorder ICD-MS, you must install the Sony ®
Memory Stick ™ Voice Editor or the Sony ® Digital Voice Editor Version 2.01. For
more information, see the documentation that came with your recorder.
■ Sony ® ICD-R100 recorder, you must install the ICD-PCLINK software. For
more information, see the documentation that came with your recorder.
■ A Panasonic ® IC recorder, you must install the Panasonic ® Voice Editor. For
more information, see the documentation that came with your recorder.
■ A Pocket PC (for example, a Compaq iPAQ), you must install the ScanSoft
Voice Recorder software. See below for more information.
■ A Dragon NaturallyMobile recorder, you can install the Voice It ® Link software,
which is not required, but can enhance the recorder’s usability. This software is
available on your Dragon NaturallySpeaking CD but it is not automatically
installed when you install Dragon NaturallySpeaking. See below for more
information.
Use the Voice It ® Link software to perform functions for your Dragon
NaturallyMobile recorder that you can’t perform from the Dragon
NaturallySpeaking Transcribe dialog box. Note that for normal transcription
from the Dragon NaturallyMobile recorder, you don’t need to have this software
installed.
Pocket PC: Installing ScanSoft Voice Recorder
If you are using a Pocket PC device like the Compaq iPAQ as a mobile recorder, you
can install ScanSoft Voice Recorder either at the same time you install Dragon
NaturallySpeaking, or at a later time.
To install ScanSoft Voice Recorder at the same time you install
Dragon NaturallySpeaking:
1 If you don’t already have ActiveSync 3.5 on your desktop, you must install it.
See http://www.microsoft.com/mobile/pocketpc/downloads/activesync35.asp for
more information.
2 Connect your PocketPC device to your computer using the device's USB
connection (or the COM port for NT systems).