Sony ICD-MS515VTP - Manual (Page 72)

6 Formatting
Dragon NaturallySpeaking User’s Guide 66
Bold, italics, and underlining
You can apply formatting to text in your document by selecting it and then saying
“Bold That,” “Italicize That,” or “Underline That.” You can also say “Strikeout That.”
To add bold, italics, and underlining:
1 Select the text you want to change.
2 Say “Bold That,” “Italicize That,” Underline That,” or “Strikeout That.”
To remove formatting:
1 Select the text you want to change.
2 Say “Restore That” to remove formatting.
Aligning text
You can change how text is aligned by placing your insertion point in the text and
saying “Center That,” “Left Align That,” or “Right Align That.”
To align text:
1 Move the insertion point to the text you want to align.
2 Say “Center That,” “Left Align That,” or “Right Align That.”
You can also use the following commands on selected text: “Format That Centered,”
“Format That Left Aligned,” and “Format That Right Aligned.”
Bulleted text
To add bullets to text, place your insertion point in the text and say “Format that
Bullet Style.” To remove bullets, say “Format that Bullet Style” again.