Sony LF-B10 - Manual (Page 26)

B
a
se
Statio
n Sett
ings
26
1 Select whether to assign an IP address to the
Base Station automatically, using the DHCP
function of your router or modem, or to assign
an IP address manually.
If you select [Automatic IP Address
Configuration (DHCP)], the router’s DHCP
server will automatically assign the [IP
Address], [Subnet Mask] and [Default
Gateway].
If you select [Manual], contact your
contracted ISP to assign the proper values in
the [IP Address], [Subnet Mask], [Default
Gateway] and [Host Name] fields.
At the time of purchase, this item is set to
[Automatic IP Address Configuration
(DHCP)].
2 Enter an IP address.
3 Enter a subnet mask.
4 Enter a default gateway.
5 Enter a host name for the Base Station, as
required.
z Tip
The host name can be specified only when
[Automatic IP Address Configuration (DHCP)]
is selected.
6 The Base Station’s MAC addresses appear.
7 Depending on the operating environment, the
domain name appears.
8 Select this if you want to assign the DNS
server automatically. The DNS server is only
assigned automatically if [Automatic IP
Address Configuration (DHCP)] is set for the
IP address.
This button is selected at the time of purchase.
9 Select this if you want to assign the DNS
server manually.
If you select this button, enter the addresses of
your ISP’s DNS servers in the [DNS1] and
[DNS2] fields.
0 Click this to save changes.
When you set the wireless mode switch to “AP”,
you can change the wireless settings for the
access point mode of the Base Station. If you
have changed the settings of the Base Station, you
should also change the wireless settings of the
LocationFree devices.
1 Wireless LAN devices that conform to the
IEEE802a/b/g standards can be used on the
following channels. When connecting your
computer to the Base Station via a wireless
connection, select a channel supported by the
LAN device.
• IEEE802.11a wireless LAN device: 5 GHz
• IEEE802.11b wireless LAN device: 2.4
GHz
• IEEE802.11g wireless LAN device: 2.4
GHz
1
2
3
4
5
6
7
8
9
0
Wireless Settings (Access
Point): LF-B20 only
1
2
3
5
6
4