Warning indicators and messages, P. 92), Self-diagnosis display/warning indicators – Sony HDR-SR5 User Manual

Page 92

Advertising
background image

92

Troubleshooting

Warning indicators and messages

If indicators appear in the viewfinder
(HDR-SR7/SR8) or on the LCD screen,
check the following.

You can fix some symptoms by yourself. If
the problem persists even after you have tried
a couple of times, contact your Sony dealer
or local authorized Sony service facility.

C:(or E:) ss:ss (Self-diagnosis
display)

C:04:ss

• The battery pack is not an

“InfoLITHIUM” battery pack (H
series). Use an “InfoLITHIUM” battery
pack (H series) (p.101).

• Connect the DC plug of the AC

Adaptor to the DC IN jack of the
Handycam Station or your camcorder
securely (p.16).

C:13:ss / C:32:ss

• Remove the power source. Reconnect it

and operate your camcorder again.

E:20:ss / E:31:ss / E:61:ss /
E:62:
ss / E:91:ss / E:94:ss

• A malfunction that you cannot service

has occurred. Contact your Sony dealer
or local authorized Sony service
facility. Inform them of the 5-digit
code, which starts from “E”.

101-0001 (Warning indicator
pertaining to files)

Slow flashing

• The file is damaged.
• The file is unreadable.

(Warning on the hard disk of the

camcorder)*

Fast flashing

• An error may have occurred with the

hard disk drive in your camcorder.

(Warning on the hard disk of the

camcorder)*

Fast flashing

• The hard disk of the camcorder is fully

recorded.

• An error may have occurred with the

hard disk drive in your camcorder.

E

(Battery level warning)

Slow flashing

• The battery pack is nearly used up.
• Depending on the operating

environment or battery conditions, E
may flash, even if there are
approximately 20 minutes remaining.

(High temperature warning)

Slow flashing

• The temperature of your camcorder is

getting higher. Turn off your camcorder
and leave it for a while in a cool place.

Fast flashing*

• The temperature of your camcorder is

extremely high. Turn off your
camcorder and leave it for a while in a
cool place.

(Low temperature warning)*

Fast flashing

• The temperature of your camcorder is

extremely low. Make the camcorder
warm.

Self-diagnosis display/Warning
indicators

C:04:00

Advertising
This manual is related to the following products: