Sony DCR-IP7BT - Manual (Page 24)

24
3
Stop playing the videotape just before the point you want to
start capturing.
Note
If the MICROMV device is in CAMERA mode, steps 3 and 4 are not necessary.
4
Click the Play button.
The image recorded in the videotape is played back on the monitor.
5
When the start point to be captured is displayed, click the
"Capture" button.
Capturing starts.
Observe the HDD remaining space indicator. Its color (colour) changes
to red when the remaining free space on the hard disk becomes
insufficient.
Note
If available free space on the hard disk becomes less than 50MB, capturing will
cease instantly. For this reason, beware if the indicator turns red.
6
When the end point to be captured is displayed, click the "Stop
Capture" button.
When capturing is finished, the dialog (dialogue) box indicating
importing progress appears.
When importing is finished, the captured file is placed on the Clip tray.
To capture other images back to back, repeat steps 3 through 6.
Note
You cannot capture images while they are displayed on the Full screen monitor.