Sony DCR-IP7BT - Manual (Page 26)

26
2
Click the Capture tab.
The Capture tab is highlighted, and the Monitor panel switches to the
Capture tray.
The Tool panel displays the Index tray where the information of the
images on the MICROMV device (e.g., Cassette Labels for videotapes,
date and time recorded, and recorded time) appears.
3
Click the "Dubbing" button.
The "Dubbing - Confirm Batch Capture" dialog (dialogue) box appears.
4
Click "OK."
The "Dubbing - Batch Capturing" dialog (dialogue) box appears.
You can cancel capturing by clicking the "Stop" button while capturing.
When capturing is finished, the dialog (dialogue) box indicating
importing progress appears.
When importing all images is finished, the captured files are placed on
the Clip tray and they are automatically arranged on the Product tray as
scenes.
5
Click "Export" if you want to export the scenes arranged on the
Product tray.
The final movie product is exported. For further information about
exporting, see "Exporting a final movie product." (page 41)
Notes
• Images that are captured by clicking the "Dubbing" button are only portion from the
recording start point (index) to the recording stop point. If the videotape has been re-
recorded over any portion of its length, and there is a break from its recording stop
point to the next recording start point, that portion of images will be skipped.
• The data of the Micro Cassette Memory are not copied.
z Hint
You can save the interim contents (status) of the Clip tray and Product tray as a project
file before quitting MovieShaker. When you open the project file next time, you can
continue creating your movie from where you left off editing last time. For further
information, see the on-line help.