Sony DCR-IP7BT - Manual (Page 33)

33
Basic Operation
Editing effects, etc.
To create a scene, select a scene from the Product tray to display it on the Edit
tray, so that you can cut off unwanted parts (trimming) or apply effects. The
changes you make to the scene are immediately reflected on the scene on the
Product tray.
Notes
• If more than one scene is selected from the Product tray, you cannot process them.
• Applying effects or adjusting the volume of a scene displayed on the Edit tray does
not affect the original clip on the Clip tray.
To select a scene for processing
To process a scene, select a scene from the Product tray to display it on the
Edit tray. You can cut off unwanted parts (trimming) from a scene. Move the
Trimming knobs to specify the portion within a scene, that you wish to use in
a movie. The changes you make to the scene are immediately reflected on the
scene on the Product tray. The same procedure is used for BGM and
narrations. For further information, see the on-line help.
Note
During processing, sequential scenes and their transitions can be previewed for the
purpose of observing the flow from scene to scene. However, they cannot be processed.
1
Click the Edit tab.
The Edit tab is highlighted, and the Monitor panel switches to the Edit
tray.
Continued