Sony HDR-AS100VR - Manual (Page 31)

Ta
bl
e of
con
ten
ts
O
p
era
tio
n
Sea
rch
Set
tings
Se
ar
c
h
In
dex
31 GB
IR-Remote Controller
You can start/stop recording and initialize the time code using the infrared remote controller
(RMT-845 (sold separately)).
To make the setting, select [SETUP] first.
1 Press the NEXT button to display [SETUP], then press the ENTER button.
2 Press the NEXT button to display [IR-RC] (IR-Remote Controller), then
press the ENTER button.
3 Press the NEXT button to select the setting, then press the ENTER
button.
• The infrared remote controller RMT-845 (sold separately) is required to use this function.
Purchase it at a Sony service center.
• You can operate only the following settings using the RMT-845 (sold separately). Other settings are
inoperable.
– Initialize the time code.
– Start/stop recording.
Allows you to operate the camera using the infrared remote controller.
Prevents operation of the camera using the infrared remote controller.
Returns to the [IR-RC] menu.
Notes
t
Setting
display