Sony LF-X11 - Manual

Quick Start Guide
LocationFree TV
LocationFree is a registered trademark of Sony Corporation.
All other names of systems, products, and services are trademarks of their respective owners.
In this manual, the ™ or ® marks are not specified.
STEP2, 3
Home
On the Go
Unpack
Check that your package includes the following:
•Base Station with stand (LF-X11)
•Monitor (LF-X11M)
•LocationFree™ Player software CD-ROM (includes LocationFree™
Player software* and Operating Instructions) (LFA-PC2)
•AC power adapter (AC-LX1B) for the Base Station
•AC power adapter (AC-LX1M) for the Monitor
•Power cord (2)
•Battery
•Stylus
•IR Blaster
•Operating Instructions
•Quick Start Guide (this document)
•Instructional DVD
•Important software notice
•Dynamic DNS Terms-of-Use Agreement
•Warranty card
* One serial key for LocationFree™ Player is supplied.
Turn On the Monitor
Place the Monitor on a soft cloth
with the LCD screen down.
From the top of the compartment
1
, slide the battery in as far as it
will go 2. Keep the Monitor stand
closed when inserting the battery.
STEP
1
Preparations
If you have additional questions related to the use of this product after reading this Quick Start Guide
and the Operating Instructions, please call our LocationFree™ Customer Support.
LocationFree™ Customer Support
1-866-925-SONY (7669) - U.S. & Canada
1-239-768-7688 - International
9:00 a.m. - 9:00 p.m. EST Mon.-Fri. (English Only)
LocationFree™ Web Sites
<U.S.>
www.sony.com/locationfree/
<Canada>
www.sonystyle.ca/locationfree/
Other device Base Station Router
Monitor
Monitor
2-655-609-11 (1)
STEP1
© 2005 Sony Corporation Printed in Japan
■ Inserting the battery
1
2
■ Connecting the power
cord to the Monitor
Symbol
■ Turning on the power
Press POWER on the top of the Monitor
to turn it on.
Connect to Your TV Signal, Other AV Devices and the Internet, and Turn On the Base Station.
4
5
Connect to a TV antenna.
Connect to a set top box (STB).
Connect to other devices
(such as DVD players, etc.). Connect the IR Blaster so
it faces the infrared
receiver on the other
devices.
Connect the LAN cable
(not supplied) to the Base
Station.
Connect the power cord to the Base Station.
Turn on the power.
Antenna cable
(not supplied)
TV antenna
Antenna cable
(not supplied)
Cable outlet
You can also
connect to the
IN 2 terminal.
Base Station rear panel
or
or
STB
IR Blaster
Infrared transmitter
Infrared receiver
AC-LX1B AC power
adapter (supplied).
Power cord
(supplied)
Lights
POWER LED
1-a
1-b
1-c Connect to a TV antenna, set top box
(STB), or other devices.
Other devices
(VCR, DVD players, etc.)
1
Power cord
(supplied)
AC-LX1M AC power adapter
(supplied) to DC IN
LF-X11
The “Welcome” screen automatically
appears when the Monitor is turned on.
Move on to STEP 2.
• Set up for watching TV away from home
with “Easy Setup (NetAV)”.
When an STB is connected with an antenna cable, remote control settings for
the STB cannot be configured with Easy Setup. In this case, perform these
settings from the [Settings] window. For details, refer to “Configuring the
On-Screen Remote for External Tuners on TV” in the operating instructions.
3
2
STEP 3
Setup to Watch TV
On the Go
(see the other side)
Setup Summary
• Unpack.
• Connect to your TV signal, other AV
devices, and the Internet, and turn on the
Base Station.
• Turn on the Monitor.
STEP 1
Preparations
• Set up for use at home with “Easy Setup
(Basic)”.
STEP 2
Setup to Watch TV at
Home (see the other side)